Foam products have occupied the market. But, how to choose is highly dependent on the quality. And, the quality is dependent on the precision with which it is cut to meet the specific requirement. This is why it is important while choosing a horizontal saw that you know what you are buying. Let’s take a closer look at the features a good horizontal foam cutting machine should have.
Features of a Horizontal Foaming Saw
When you buy a horizontal machine to cut foam, evaluate how well it can be used to cut memory foam or open-cell foam. A good cutting machine can slice foam into appropriate sheets to be sold the way they are or to be turned into more structured product pieces. It comes with an automated table that is capable enough to pull the load through a wide blade. The best horizontal cutters can handle foam sizes as big as 51 inches tall and 88 inches wide.
Versatility is another important factor that affects the superior quality of a horizontal foam cutter. The machine can weigh approximately 4500 lbs to 6000 lbs and although weight doesn’t determine the quality, a good horizontal machine will have a heavy build.
In most such machines, you will find that it operates with a flat plane. The blade does not support any articulation. And, this is why it helps to cut extremely thin sheets with a width no more than 1/4 inches. The precision and speed is an amazing factor here.
Where are Horizontal Foam Cutters used?
Horizontal foam cutters are generally used in producing mattresses and other such items. There’s a wide scope of versatility that sees no ends to how this machine can be used. They are also used for upholsterers in case of slicing copious amounts of sheets. The high performance of this cutter is what helps in cutting foam in bulks and saving more time in work.
A gentle reminder that although the horizontal cutting machine does cut foam precisely, there will still be some rough edges on some products. This is why the product must be checked before being sold.
Other Ways of Cutting Foam Horizontally
Of course, the horizontal cutting machine is here to stay, but, at the same time, it’s not bad to know a few other options.
1) Serrated Carving Knife
Foam cutting can be compared to an identical process like bread slicing. This is why it is only logical that a serrated carving knife would act as a similar type of blade. A cost-effective DIY method to cut foam, you can follow this process by running the knife back-and-forth smoothly through the foam. Be cautious while making these cutting motions.
2) Electric Turkey Carving Knife
More like a traditional blade, this knife carves its way through the foam without any forced pressure. The only drawback here is that these carving knives cost a little more than any traditional knife.
Check out AS Enterprises for foam cutters and more.
