Are you intimidated by the thought of cutting lines using a circular saw machine? We assure you, it can happen to anyone. But, such tools for DIY projects are simple and basic. Fret not for we are here to guide you through this. Once you go through this blog, you will know how to confidently use a circular saw to make the perfect cuts.
The Basic Mechanism to Cut Using a Saw Machine
For any beginner, the journey begins with learning how to use a circular saw without cutting themselves. The safety and the expertise combined give a successful result. So, first, learn to use it with proper care following these step-by-step instructions.
- Mark the line you wish to cut and measure it.
- Use a workstation to clamp it tightly so that it doesn’t slip while you are cutting it.
- Check which blade would be appropriate for the cut and attach it to the saw accordingly.
- Keep the depth of the blade 1/4 inches underneath the material you want to cut.
- Check the bevel angle.
- Attach the battery of the saw or plug it into a power source.
- Set the shoe of the saw at the cutting material’s edge right next to the line you have marked to cut.
- Raise the blade guard.
- Keep the blade next to the workpiece without touching it.
- Click on the lock switch and set the saw at its full speed.
- Make sure the shoe is on the surface firmly. Keep the trigger engaged as you move forward in an easy motion towards the marked line.
- Keep the shoe flat and move the circular saw alongside the scrappy portion of the marked line.
- Don’t push the saw with force as it can harm the motor.
- To stop, unpress the trigger. Once done, keep the saw back at its place.
Cutting Straight Lines Using a Circular Saw Machine
Cutting straight lines can be a little difficult for a beginner. Straight cuts made by basic circular cutting machines are of 2 types: a crosscut and a rip cut.
What’s a crosscut?
In general terms, it is a cut that is made against the grain of the wooden material. For instance, when you trim a wooden board to a particular size.
What’s a rip cut?
Unlike a crosscut, a rip is a cut that is made to go alongside the grain of the wooden material. Rip cuts are generally done to cover longer ranges. For instance, if you want to trim a 4ft x 8ft wooden plywood to 3ft x 7ft.
In both cases, accurate measurements are vital. This is how you keep from cutting the area that is not included in the cut line. These measurements along with markings made to guide the cuts can help you track how the blade goes from one point to another.
For any straight cut, a saw guide is a must. This helps you be certain that you are cutting the material straight. You can also put a speed square on the wooden material you want to cut. Align your blade with the marked line and keep sliding the speed square’s edge against the shoe of the saw. This is a good way to guide your saw in a straight line.
Important Tips to Remember
No matter which cut you are making, keep these points in your consideration:
- Keep the good side downward-facing so that the backside has wood splinters.
- Use masking tape to make the cut line.
- Never clamp the material from both sides.
AS Enterprise has mattress making machines and circular saws of A-grade quality. Check out now for more!
